Concentrated engine anti-freeze

Precautions before use :

• Check compatibility with vehicle cooling system.
• Wear protective gloves when handling the product.
• Avoid contact with skin and eyes.

Product dilution :

Forever concentrated engine antifreeze must be diluted with demineralised water before use. Adjust the mixture according to climatic conditions:

Proportion Antifreeze / Water for frost protection
• 30% Antifreeze / 70% Water Down to -12°C
• 40% Antifreeze / 60% Water Down to -24°C
• 50% Antifreeze / 50% Water Down to -37°C
• 60% Antifreeze / 40% Water Down to -40°C

Coolant replacement or top-up :

Drain (if necessary) :
• Switch off the engine and wait until it is cold.
• Place a container under the radiator and open the drain valve.
• Let the old fluid drain completely.

Filling :
• Close the drain valve.
• Slowly pour the antifreeze + demineralised water mixture into the expansion tank or radiator.
• Check the level and adjust if necessary.

Bleeding the circuit :
• Start the engine and run for a few minutes with the heater switched on to eliminate any air bubbles.
• Check the level again and top up if necessary.

Advice and maintenance :

• Check the coolant level regularly.
• Replace the antifreeze according to the manufacturer’s recommendations (generally every 2 to 5 years).
• Never mix with other types of antifreeze to avoid incompatibility.

Safety and storage :

• Store in a cool, dry place away from light and extreme temperatures.
• Keep out of reach of children and animals (toxic if swallowed).
• Dispose of old liquid in accordance with current regulations.

Forever concentrated engine antifreeze provides long-lasting protection and optimum engine performance in all seasons !