Eco white spirit

Precautions before use :

Temperature : The product may solidify below 9°C. If solidification occurs, gently warm the container to room temperature until complete liquefaction before use.
Compatibility : Always carry out a preliminary test on an inconspicuous area of the substrate to check compatibility.
Protection : Although the product is vegetable-based and odourless, it is recommended to work in a well-ventilated area and to wear protective gloves to avoid prolonged contact with the skin.

Thinning of paints and varnishes :

Dosage : Add eco white spirit at 5% of the total volume of paint or varnish.
Mixing : Gradually incorporate the substitute while stirring constantly to ensure perfect homogeneity.
Warning : Diluting more than 5% can significantly extend the drying time. It is therefore essential to respect this dosage and to carry out a preliminary test if a higher dilution is envisaged.

Cleaning fresh paint stains :

Preparation : Remove excess paint from the surface concerned.
Application : Soak a clean cloth in eco white spirit.
Cleaning : Gently dab the stain with the soaked cloth, then rub lightly until the stain disappears.
Finishing : If necessary, rinse the treated area with soapy water and dry with a clean cloth.

Maintenance of painting equipment :

Soaking : Dip brushes, rollers or other tools directly into pure eco white spirit.
Cleaning : Leave to soak until the paint has completely dissolved.
Rinsing : After cleaning, rinse equipment thoroughly with soapy water to remove any product residue.

Safety and environment :

Disposal of residues : Do not dispose of product residues or rinsing water down the drain or in the environment.
Storage : Keep the product in its original packaging, tightly closed, away from heat and frost.
Keep out of reach of children.