Fire cement

Surface preparation :

• Make sure the surfaces to be assembled or repaired are clean, dry and free of dust, grease or any other contaminants.

Application :

• Cut off the end of the cartridge and screw on the applicator tip supplied.
• Insert the cartridge into a suitable extruder gun.
• Apply the refractory cement in an even bead or layer over the prepared surface, ensuring that any cracks or joints are completely filled.
• Recommended joint thickness is 2 to 5 mm.

Assembly :

• Assemble the elements to be masoned or fill the cracks immediately after applying the cement.
• Remove excess product with a spatula or damp cloth before curing begins.

Drying :

• Allow the cement to dry for 48 hours at room temperature to ensure complete hardening.

Putting into service :

• After complete drying, gradually expose the repaired area to heat to avoid thermal shock.

Precautions for use :

• Use indoors only.
• Clean tools and fresh stains with water.
• Store the product away from frost, heat and humidity.
• Wear protective gloves during application to avoid skin contact.
• In the event of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

By following these instructions, you will ensure an effective and long-lasting application of Pyrofeu fire cement for your masonry and repair work subject to high temperatures.