Glue for fire-resistant gaskets

Preparing surfaces :

• Make sure the surfaces to be assembled are clean, dry and free from dust, grease or any other contaminants.

Applying the adhesive :

• Apply the adhesive directly from the tube to the joint or surface concerned.
• Spread evenly to ensure optimum adhesion.

Assembly :

• Position the gasket over the glued surface.
• Apply sufficient pressure to ensure good contact between the joint and the surface.

Drying :

• Allow to dry for 48 hours at room temperature to ensure complete curing.

Putting into service :

• After complete drying, gradually expose the bonded area to heat to avoid thermal shock.

Precautions for use :

• Clean tools and any drips or splashes with hot water, soapy if necessary, before the adhesive hardens.
• Rinse equipment with water after use.
• Store the product away from heat.
• Wear protective gloves during application to avoid skin contact.
• In the event of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

By following these instructions, you will ensure effective, long-lasting application of Pyrofeu refractory joint adhesive, guaranteeing optimum sealing of your heating appliances.