Eco black varnish

Preparing the surface :

• Make sure the surface is clean, dry, smooth and free of dust, grease or old, flaking paint.
• If necessary, lightly sand the surface with abrasive paper for better adhesion of the varnish.
• Degrease metal surfaces before application.

Preparing the product :

• Stir eco varnish black well before use to even out the shade.
• If necessary, thin slightly with water or an acrylic paint additive to make application easier.

Application :

• Use a brush, roller or spray gun to apply a thin, even coat.
• Work in a dust-free environment.
• Always apply in the direction of the wood grain or in even coats on metal surfaces.
• Do not apply in wet weather.

Drying time :

• Let dry for approximately 2 to 4 hours between coats (time may vary depending on ambient conditions).
• Apply a second coat for optimum results and better protection.

Finishing and care :

• Once the last coat is dry, avoid intensive contact for the first few days to allow complete hardening.
• Clean tools immediately with water.

Tip : For optimum results, finish with a thin coat of clear varnish if you want a shiny effect or extra durability.